Solar On Grid System
A solar system which works with the grid is called on-grid or grid-tied solar system, there are three components in this system, such asPanels,Inverters,Installation Kit. The main purpose of installing an on-grid solar system is to save electricity bill. This is a maintenance free system.
Solar Hybrid Systems
Hybrid solar systems generate power in the same way as a common grid-tie solar system but use special hybrid inverters and batteries to store energy for later use. This ability to store energy enables most hybrid systems to also operate as a backup power supply during a blackout, similar to a UPS system
Solar Off Grid System:
An off-grid solar system comes with a power backup. It works independent of the grid. Most home appliances such as Fans, TV, Cooler, AC, Water Pump etc. can work through this system. For instance, a 1 kW off grid solar system is sufficient for a 2-4 BHK house. But if you also want to run 1HP Water Pump in your home you could use a 3 kW off grid solar system. If you are planning to run an AC then you should use a 5 kW system. For commercial areas like a shop, petrol pumpetc a 10 kW off-grid solar system can be used..
Solar Floating Solar System
Floating solar, or floating photovoltaics (FPV), is a solar array that floats upon a body of water. The solar panels are placed on a buoyant structure to keep them above the water's surface and are usually located on relatively calmer bodies of water such as ponds, lakes and man-made dam reservoirs.
Solar Street Light
All in One Solar Street Light:
An integrated solar street light system which combines the green-energy parts of solar panel, LED lamp and the Li-Fe battery into a single product. This all-in-one product, together with a motion detector, offersa solution of low-energy consumption, long-lasting and high-luminance as well as free maintenance for atleast five years. The intelligent controller and sensor meet different control requirements, and at the sametime, this product it is convenient in shipment (one light per box) and installation.
Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Mono Crystalline Solar Panels
Monocrystalline solar panels are generally thought of as a premium solar product. The main advantages of moncrystalline panels are higher efficiencies and sleeker aesthetics. To make solar cells for monocrystalline solar panels, silicon is formed into bars and cut into wafers. These types of panels are called “monocrystalline” to indicate that the silicon used is single-crystal silicon. Because the cell is composed of a single crystal, the electrons that generate a flow of electricity have more room to move
BIPV Solar Panel
Building-integrated photovoltaics (BIPV) are photovoltaic materials that are used to replace conventional building materials in parts of the building envelope such as the roof, skylights, or facades. They are increasingly being incorporated into the construction of new buildings as a principal or ancillary source of electrical power, although existing buildings may be retrofitted with similar technology. The advantage of integrated photovoltaics over more common non-integrated systems is that the initial cost can be offset by reducing the amount spent on building materials and labor that would normally be used to construct the part of the building that the BIPV modules replace..[
Solar Polycrystalline Panels:
Polycrystalline solar panels are made from silicon. However, instead of using a single crystal of silicon, manufacturers melt many fragments of silicon together to form the wafers for the panel. Polycrystalline solar panels are also referred to as “multi-crystalline,” or many-crystal silicon.
Flexible Solar Panels
In contrast to conventional (flat) solar panels, flexible solar panel technology enables solar power to be generated by wafer-thin, light, and bendable panels that you can carry or paste at any surface you want
Bifacial Solar Panel
Bifacial modules produce solar power from both sides of the panel. Whereas traditional opaque back-sheeted panels are monofacial, bifacial modules expose both the front and backside of the solar cells.
Solar Water Pump
Solar Submersible Pump
There is no need of battery and it can directly connect the solar panels to the submersible pump input through a variable frequency drive (VFD). VFD is an electronic device equipped with inverter and MPPT (Maximum Power Point Tracking).
Solar Motor Pumps - DC
There is no need of battery and it can directly connect the solar panels to the motor pump input with inverter and MPPT (Maximum Power Point Tracking).
Solar Ac Submersible Pumps systems
Water your fields with the power from the sun. With the cost of diesel and electricity rising constantly, solar powered water pumps are the perfect alternative for rural regions as these have a low maintenance cost and ensure a long product life. Convert your existing solar pump with help of inverter and battery in solar pumps
Solar Motor Pumps AC systems
Water your fields with the power from the sun With the cost of diesel and electricity rising constantly, solar powered water pumps are the perfect alternative for rural regions as these have a low maintenance cost and ensure a long product life. Convert your existing solar pump with help of inverter and battery in solar pumps
Solar CSR Product
A solar air cooler works on solar energy. As the name suggests, it uses solar power to meet its energy requirements. ... The solar energy from sun is converted into chemical energy and stored in a battery. This battery then acts as the source of power supply for the cooler
Solar Table Fans:
Solar rechargeable fans and table fans are two such appliances that use solar energy to run
Solar Celling Fans:
Solar ceiling fans use solar energy to run, these are basically DC fan.
A solar lamp also known as solar light or solar lantern, is a lighting system composed of a LED lamp, solar panels, battery, charge controller and there may also be an inverter. The lamp operates on electricity from batteries, charged through the use of solar photovoltaic panel. Solar-powered household lighting can replace other light sources like candles or kerosene lamps. Solar lamps have a lower operating cost than kerosene lamps because renewable energy from the sun is free, unlike fuel. In addition, solar lamps produce no indoor air pollution unlike kerosene lamps. However, solar lamps generally have a higher initial cost, and are weather dependent.
Solar Off Grid Inverters:
Off-Grid Inverter needs a battery bank to function. Here's how it works: your solar panels feed DC power into the batteries. Then your inverter takes that power and “inverts” it, creating AC power for your home. This works essentially like a miniature power grid.
Solar On Grid Inverters:
A solar inverter or PV inverter, is a type of electrical converter which converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid.
Solar Hybrid Inverters:
In the context of residential solar+storage systems, a hybrid inverter (sometimes referred to as a multi-mode inverter) is an inverter which can simultaneously manage inputs from both solar panels and a battery bank, charging batteries with either solar panels or the electricity grid (depending on which is more economical or preferred).
Solar Batteries reserves energy for later consumption that is charged by a connected solar system. The stored electricity is consumed after sundown, during energy demand peaks, or during a power outage. Most common on residential or commercial buildings. Solar batteries use three electrodes. It has a lithium plate base, two layers of electrode separated by a thin sheet of porous carbon and a titanium gauze mesh that played host to a dye-sensitive photo electrode. Battery’s ions oxidize into lithium peroxide by porous materials, which chemically decompose into lithium ions and stored as lithium metal. The device used conventional liquid electrolyte consisting of part salt and part solvent..