Our Products

Solar On Grid System

A solar system which works with the grid is called on-grid or grid-tied solar system, there are three components in this system, such asPanels,Inverters,Installation Kit. The main purpose of installing an on-grid solar system is to save electricity bill. This is a maintenance free system.

Floation Panel

An off-grid solar system comes with a power backup. It works independent of the grid. Most home appliances such as Fans, TV, Cooler, AC, Water Pump etc. can work through this system. For instance, a 1 kW off grid solar system is sufficient for a 2-4 BHK house. .


Flexible Solar Panels

In contrast to conventional (flat) solar panels, flexible solar panel technology enables solar power to be generated by wafer-thin, light, and bendable panels that you can carry or paste at any surface you want

Mono crystalline panels

Monocrystalline solar panels are generally thought of as a premium solar product. The main advantages of moncrystalline panels are higher efficiencies and sleeker aesthetics.To make solar cells for monocrystalline solar panels


Solar Street Light

Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.

Solar Dc Water Pump

There is no need of battery and it can directly connect the solar panels to the motor pump input with inverter and MPPT (Maximum Power Point Tracking).


Bifacial Panel

Bifacial modules produce solar power from both sides of the panel. Whereas traditional opaque-backsheeted panels are monofacial, bifacial modules expose both the front and backside of the solar cells.

BIPV Solar Panel

Building-integrated photovoltaics (BIPV) are photovoltaic materials that are used to replace conventional building materials in parts of the building envelope such as the roof, skylights, or facades.[


Solar lanterns:

A solar lamp also known as solar light or solar lantern, is a lighting system composed of a LED lamp, solar panels, battery, charge controller and there may also be an

Solar Table Fans:

Solar rechargeable fans and table fans are two such appliances that use solar energy to run


Solar coolers:

A solar air cooler works on solar energy. As the name suggests, it uses solar power to meet its energy requirements. ... The solar energy from sun is converted into chemical energy and stored in a battery. This battery then acts as the source of power supply for the cooler

Solaroff grid inverters:

Off-grid inverter needs a battery bank to function. Here's how it works: your solar panels feed DC power into the batteries. Then your inverter takes that power and “inverts” it, creating AC power for your home. This works essentially like a miniature power grid.


Solarhybrid inverters:

In the context of residential solar+storage systems, a hybrid inverter (sometimes referred to as a multi-mode inverter) is an inverter which can simultaneously manage inputs from both solar panels and a battery bank, charging batteries with either solar panels or the electricity grid (depending on which is more economical or preferred).

All in one Solar street light:

An integrated solar street light system which combines the green-energy parts of solar panel, LED lamp and the Li-Fe battery into a single product. This all-in-one product, together with a motion detector, offersa solution of low-energy consumption, long-lasting and high-luminance as well as free maintenance for atleast five years. The intelligent controller and sensor meet different control requirements, and at the sametime, this product it is convenient in shipment (one light per box) and installation.


SolarPolycrystalline panels:

Polycrystalline solar panels are made from silicon. However, instead of using a single crystal of silicon, manufacturers melt many fragments of silicon together to form the wafers for the panel. Polycrystalline solar panels are also referred to as “multi-crystalline,” or many-crystal silicon.

SolarPolycrystalline panels:

Polycrystalline solar panels are made from silicon. However, instead of using a single crystal of silicon, manufacturers melt many fragments of silicon together to form the wafers for the panel. Polycrystalline solar panels are also referred to as “multi-crystalline,” or many-crystal silicon.


Solar Hybrid Systems:

Hybrid solar systems generate power in the same way as a common grid-tie solar system but use special hybrid inverters and batteries to store energy for later use. This ability to store energy enables most hybrid systems to also operate as a backup power supply during a blackout, similar to a UPS system.

SolarMono crystalline panels:

Monocrystalline solar panels are generally thought of as a premium solar product. The main advantages of moncrystalline panels are higher efficiencies and sleeker aesthetics. To make solar cells for monocrystalline solar panels, silicon is formed into bars and cut into wafers. These types of panels are called “monocrystalline” to indicate that the silicon used is single-crystal silicon. Because the cell is composed of a single crystal, the electrons that generate a flow of electricity have more room to move